|
Product Details:
|
| Name: | Semi Automatic Busbar Assembly System | Max. Busbar Height: | 330mm |
|---|---|---|---|
| Max. Busbar Length: | 6000mm | Working Efficiency: | Around 3000mm/4min |
| Length Of Reversal Part: | 4500mm | Manual Operation Station Length: | 1500mm |
| Power: | 380~415VAC 50~60Hz 5kW | Dimension: | L18000mm*W800mm*H1900mm |
| High Light: | Semi Automatic Busbar Assembly Line,5kW Busbar Assembly Line,Semi Automatic Busbar Assembly System |
||
Manual Riveting Semi Automatic Busbar Assembly Line
Function introduction
Semi automatic assembly line is composed of three parts, pre-assembly station, automatic reversal station and accessory assembly station.
Pre-assembly station: Operators will pre-assemble and fix busbar main parts by the fixtures and transfer the busbar to the automatic reversal station manually.
Automatic reversal station: When busbar arrives in the reversal station, operator shall fix the busbar by clamp and start riveting on one side. After one side is done, rotators will be reversed 180 degrees for other side’s riveting.
Accessory assembly station: After busbar is riveted, operator will assemble the busbar accessories at this station.
Equipment data on semi-automatic busbar assembly line
| No. | Parameters |
| Model | KD-ZDX/H-4-6(4.5) |
|
Max. Busbar Height |
330mm (Single Layer) |
|
Max. Busbar Length |
6000mm |
|
Working Efficiency |
Around 3000mm/4min |
| Riveting Machine | Not included |
| Rotator Nos | 4 sets (standard) |
|
Length of Reversal Part |
4500mm |
|
Manual Lifting Fixture Nos |
3 pieces |
|
Manual Operation Station Length |
1500mm |
| Hanger Material | Aluminum hanger |
| Riveting Type | Manual riveting |
| Power | 380~415VAC 50~60Hz 5kW |
| Equipment Dimension | L18000mm*W800mm*H1900mm |
Feature:
1. automatic riveting
2. The working principle is to recognize the busbar type and adjust all the parameters in the machine automatically by scanning the bar code. By module interconnection among PLC, network, touch screen and IPC etc.,
3. automatic assembly machine can also achieve information communication with ERP, automatic inspection machine and other related machines.
4. automatic assembly machine has self-checking functions by self diagnosing each input and output signal to avoid failures. Furthermore, data statistics for machine’s OEE (comprehensive utilization rate) is helpful for future data analysis.
Fuction:
the automatic assembly machine will help to reduce manpower and improve the product quality and working efficiency.
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807
